西雅士单元

3l-audio-3

H1215-08 CA18RNX


18 cm (6,5’’) cone driver, developed for use as a long throw high fidelity woofer or woofer/midrange unit.

Classical coated paper cone gives a smooth extended frequency response with a controlled roll off.

Large magnet system gives good transient response, and the bumped back plate together with the very long, and light weight copper clad aluminium voice coil allow for extreme coil excursion with low distortion.

Extremely stiff and stable injection moulded metal basket keeps the critical components in perfect alignment.

Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.

Frequency response



The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 12L closed box. Input 2.83 Vrms, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V sine signal.

Specifications



*IEC 268-5 SEAS reserves the right to change technical data

3l-audio-3

交易区新帖推荐

H1189-06 27TDFC



27TDFC is a High Definition precoated fabric dome tweeter with a wide, soft
polymer surround and a rear chamber.

Sonotex precoated fabric diaphragm with high consistency and excellent stability
against variations in air humidity.

Sonomax surround for low resonance and excellent mechanical linearity.
Voice coil windings immersed in magnetic fluid increase short term power handling
capacity and reduce the compression at high power levels.

Stiff and stable rear chamber with optimal acoustic damping allows the tweeter to be
used with moderately low crossover frequencies.

The chassis is precision moulded from glass fibre reinforced plastic, and its front
design offers optimum radiation conditions.

Frequency response



The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees, mounted in a 0.6m by 0.8m baffle. Input 2.83 Vrms, microphone distance 0.5m, normalized to SPL 1m. The impedance is measured without baffle using a 2V sine signal.

Specifications



*IEC 268-5, via High Pass Butterworth Filter 2500Hz 12 dB/oct. SEAS reserves the right to change technical data

ql888

原帖由 高宁 于 2009-9-1 17:01 发表
需要两对SAES单元，请各位帮忙参考一下：H416+H519与H1215+H0831的素质差异有多大？哪一种配对要全面一点？请别泼水哦[s:21]

我曾经和朋友在SAES的代理(傲士)详细的对比过，H416与H1215各有优缺点，H416的低频下沉量感比1215多一点，但低频的质感和层次感比不上H1215；中频段的表现，H416人声有一点蒙，细节不不够清楚，而H1215的人声就比较自然，声音更有磁性。H0831的高音段比H519好（声音的延伸、空气感、色彩更好），但H519的中音就相对饱满一些。最后,我们买了H0831和H1215.
据了解，H1215是H416的升级版。价格要高一些。
个人认为：H0831+H1215搭配比H416+H519好，原因是声音更鲜活....[s:97] [s:97] [s:97]

高宁

谢谢3l-audio-3兄和ql888兄的答疑解惑，只是3l-audio-3兄的那一大串英文算是白写了——我是一个单词都没看懂[s:97] [s:97] [s:97] [s:21] [s:21] [s:21]

liupeng666l

[s:31] [s:31] [s:31]

高宁

交易区新帖推荐

通过ql888兄的实践和分析，416和1215风格和音色取向有不同，也可以简单地理解为后者要胜出很多，作为SAES经典单元系列中一个名气不小的单元，请列位看官再重点谈谈H416一下如何，它成败的主要因素是什么

pkwangjian

现在H1215-08 CA18RNX 和H1189-06 27TDFC在哪儿可以买到？多少钱？我想要买

高宁

作为SAES经典单元系列中一个名气不小的单元，请列位看官再重点谈谈H416一下如何，它成败的主要因素是什么

TT1558

DIY去diy论坛探讨似乎更合适些，这里多是器材派，基本“不差钱”，对这样的问题兴趣不大的.....[s:68]