UID117799
威望8
金钱23488
交易诚信度13
主题4
帖子375
注册时间2005-2-4
最后登录2006-12-26
中级会员
  
交易诚信度13
注册时间2005-2-4
|

楼主 |
发表于 2006-4-4 23:15
|
显示全部楼层
Rotel 1057 + 1075

Model RSX-1057
AUDIO
Continuous Amplifier Power
(Five channels driven) 75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power
(two channels driven) 100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Total Harmonic Distortion <0.09 %
Intermodulation Distortion (60 Hz:7 kHz) <0.05 %
Frequency Response
Analog Bypass 10 Hz - 120 KHz, ± 3 dB
Digital Input 10 Hz - 95 KHz, ± 3 dB
Signal to Noise Ratio (IHF A-weighted)
Analog Bypass 95 dB
Digital Input 0 dBFs (Dolby Digital, dts) 92 dB
Input Sensitivity/Impedance Line Level: 200 mV/100K ohms
Contour (LF / HF) ± 6 dB at 50 Hz / 15 KHz
Preamp Output Level/Impedance 1.0 V / 1K ohm
Decodable Input Signal Dolby Digital, Dolby Digital EX, Dolby Prologic IIx, DTS, DTS_ES, DTS96/24, LPCM (up to 192K), HDCD, MP3, MPEGMultichannel
Video
Frequency Response 3 Hz - 10 MHz, ± 3 dB (Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB (Component Video)
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1.0 Volt
FM Tuner -
Usable Sensitivity 14.2 dBf
Signal to Noise Ratio (at 65 dBf) 70 dBf
Harmonic Distortion (at 65 dBf) 0.03%
Stereo Separation (1 kHz) 45 dB
Output level 1 V
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity 500 uV/m
Signal to Noise Ratio 40 dB
Output level 500 mV
Antenna Input Loop Antenna
General
Power Consumption: 450 watts, Standby
6 watts
Power Requirements
(AC) 115 volts, 60 Hz (USA version)
230 volts, 50 Hz (CE version)
Dimensions (W x H x D):
432 x 162 x 442 mm
17 1/8 x 6 1/2 x 16 5/8"
Front Panel Height 150 mm, 5.9"
Weight (net): 17 Kg, 38 lbs.
RMB-1075 High current five channel amplifier

Model RMB-1075
Continuous Power Output
(20-20 kHz, <0.03%) 5x120 watts /ch / 8 ohms
DIN Power Output
(1 kHz, 1%) 5x200 watts /ch / 4 ohms
Total Harmonic Distortion
(20 Hz - 20 kHz, 8 ohms) <0.03% maximum
cont. rated power
one-half rated power
one watt per channel
Intermodulation Distortion
(60 Hz: 7 kHz, 4:1)
<0.03%, maximum
<0.05%, maximum
<0.05%, maximum
<0.03%, maximum
Frequency Response 15Hz - 100kHz +0.5dB, -3dB
Damping Factor
(20 - 20,000 Hz, 8 ohms)
-
180
Speaker Impedance 4 ohms minimum
Signal to Noise Ratio (IHF A network) 116 dB
Input Impedance/Sensitivity
33 kOhms / 1.0 V
Power Requirements:
115 volts, 60 Hz (U.S. version)
230 Volts, 50 Hz (European version)
Power Consumption: 800 Watts
Dimensions (W x H x D):
430 x 188 x 385 mm
16.93" x 7.4" x 15.59"
Weight (net): 17kg, 37.4 lbs. |
|