UID1571394
威望1
金钱17175
交易诚信度0
主题24
帖子5009
注册时间2023-5-13
最后登录2025-12-12
中级会员
  
交易诚信度0
注册时间2023-5-13
|
Low-Distortion 3-Pole Power Cable
低失真三极电源电缆
Perfect-Surface Copper (PSC) with Silver-Plated Drain Wires
表面光滑铜(PSC)带镀银导线
Quiet Background and Minimal Active-Circuit Misbehavior Due to RF/ND-Tech (US Patent # 8,988,168) & Direction-Controlled Conductors and Shields
静音背景和最小的有源电路错误行为,由于RF/ND技术(美国专利# 8,988,168)和方向控制导体和屏蔽
ZERO (No) Characteristic Impedance (Uncompressed Current Transfer)
零(无)特性阻抗(未压缩电流传输)
THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any AC cable. Even the most sophisticated filters and power supplies cannot eliminate this Transient Intermodulation Distortion (TIM) as the induced RF noise modulates the low-level audio/video signal.
挑战:无论交流电源多么完美,任何交流电缆都会产生失真。即使是最先进的滤波器和电源也无法消除这种瞬态互调失真(TIM),因为诱导的射频噪声会对低电平音频/视频信号进行调制。
THE SOLUTION: NRG-Z3 cables use direction-controlled Perfect-Surface Copper (PSC) strands in a 7-strand Semi-Solid Concentric conductor arrangement in which strands are packed more tightly and never change position within the bundle. This construction significantly reduces strand interaction distortion. The extremely pure and smooth-surface PSC conductors minimize distortion caused by grain boundaries which exist in any metal conductor.
解决方案:NRG-Z3电缆采用7股半固态同心导体排列中的定向完美表面铜(PSC)股,股被包装得更紧密,并且永远不会改变束内的位置。这种结构显著降低了股间相互作用的失真。极其纯净和光滑表面的PSC导体最大限度地减少了存在于任何金属导体中的晶界引起的失真。
NRG-Z3’s patented RF/ND-Tech and direction-controlled Silver-Plated shield conductors efficiently drain RF noise from the line and neutral shields to ground via the third “ground” pin. In addition. NRG-Z3’s common-mode phase-cancelling array provides additional differential linear filtering. The net result is powerful, dynamic and immersive!
NRG-Z3的专利RF/ND技术和方向控制镀银屏蔽导体,通过第三个“接地”引脚将线路和中性屏蔽的RF噪声有效地导出到地面。此外,NRG-Z3的共模相位抵消阵列提供了额外的差分线性滤波。最终结果是强大、动态和沉浸式!
AQ打的二逼们满地找牙。
PERFECT-SURFACE COPPER (PSC) CONDUCTORS
完美表面铜(PSC)导体
The astonishingly smooth and pure Perfect-Surface processed conductors minimize distortion caused by grain boundaries and surface discontinuities that exist in any metal conductor.
经过完美表面处理的导体非常光滑和纯净,最大限度地减少了任何金属导体中存在的晶界和表面不连续性造成的变形。
RF/ND-TECH (PATENTED RADIO-FREQUENCY GROUND-NOISE DISSIPATION) MINIMIZES CIRCUIT MISBEHAVIOR BY CANCELLING INDUCED RF NOISE
RF/ND技术(专利射频接地噪声消散)通过消除诱导射频噪声来最小化电路异常行为
AC Ground wires may provide protection from an electrical short circuit, but they also act as an antenna. Thus, they are subject to induced radio-frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio/video circuits. AudioQuest’s RF/ND-Tech greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit topology uses a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. US Patent # 8,988,168.
交流接地线可以提供防止短路的保护,但它们也作为天线。因此,它们会受到诱导射频(RF)噪声的影响。这种RF噪声绕过组件电源,通常直接耦合到系统最敏感的音频/视频电路中。AudioQuest的RF/ND技术大大降低了这种失真,在可能的最宽的无线电频率带宽(范围)上产生前所未有的噪声消散水平。我们独特的电路拓扑结构使用了共模相位抵消阵列,并与专有的介电材料配合使用,提供额外的差分线性滤波。美国专利# 8,988,168。
ZERO-TECH (NO DEFINED CHARACTERISTIC-IMPEDANCE)
零技术(无定义特性阻抗)
While many AC power cables feature low DC resistance in order to accommodate the demand for high current, a cable’s characteristic impedance is also crucial for optimal performance. Unlike most AC cables that constrict or compress an audio-provoked transient, AudioQuest AC cables combine low DC resistance and zero (no) characteristic impedance in order to deliver uncompressed transients on demand.
虽然许多交流电源电缆具有低直流电阻,以适应高电流的需求,但电缆的特性阻抗对最佳性能也至关重要。与大多数收缩或压缩音频诱导瞬态的交流电缆不同,AudioQuest交流电缆结合了低直流电阻和零(无)特性阻抗,以按需传输未压缩的瞬态。
SEMI-SOLID CONCENTRIC CONDUCTORS
半固态同心导体
In our Semi-Solid Concentric conductor topology, strands are packed more tightly and never change position within the bundle, significantly reducing strand-interaction distortion.
在我们的半固态同心导体拓扑中,线束被紧密地排列在一起,并且不会改变线束内部的位置,从而显著降低了线束之间的相互作用失真。
SILVER-PLATED DRAIN WIRES
镀银排水线
Direction-controlled Silver-Plated shield conductors efficiently drain RF noise from the line and neutral shields to ground via the third “ground” pin. The net result is powerful, dynamic, and immersive.
方向控制镀银屏蔽导体有效地将射频噪声从线路和中性屏蔽通过第三个“接地”引脚排到地面。最终结果是强大、动态和沉浸式。
DIRECTION-CONTROLLED CONDUCTORS
方向控制导体
All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance. A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly.
所有拉伸金属线或导体具有非对称的,因此方向性,颗粒结构。AudioQuest控制产生的射频阻抗变化,以便噪音从会导致失真的地方排出。正确的方向是通过听每个AudioQuest音频电缆中使用的每批金属导体来确定的。如果适用,连接器上会清楚地标记箭头,以确保卓越的音质。对于大多数型号的AQ电缆,箭头不仅表明优化金属方向性作为噪声消散部分的方向,而且还表明屏蔽和GND的非对称附件,以优化整个系统的性能。AudioQuest多方面的噪声消散技术的一个基本方面,方向控制导体确保诱导噪声被适当地消散和排出。
|
|