UID28849
威望5
金钱13048
交易诚信度0
主题1
帖子109
注册时间2003-1-7
最后登录2012-10-19
中级会员
  
交易诚信度0
注册时间2003-1-7
|
There was a problem in earlier editions of the 436 where the voltages were set too high. Pioneer engineers can patch the 436 with new firmware to reduce the voltages, but only if the screen has run less than 200 hours. New models shipping since Feb 2006 (see next question) now have the voltages reduced.
在avforums论坛上找来的帖子,大意是说436早期型号的电压设置太高,06年2月之后的就改正了.电压设置过高会导致容易烧屏.通过改firmware 可以修正,不过上一要在开机时间少于200H的新机才可以.
不过这是在英国出售的型号.中国的不知道有没有这个问题.大家使用中还是当心一点,不要把亮度、对比度设太高了.还有一个对比度动态管理的选项一定要关掉(关掉我感觉效果也好不少)。我的电视现在已经开机320H了,一切都好,效果非常让人满意. |
|