UID73697
威望27
金钱11073
交易诚信度0
主题0
帖子44
注册时间2004-6-4
QQ
最后登录2019-2-18
禁止发言
交易诚信度0
注册时间2004-6-4
|
问一下楼主，我测试刻录后ＣＤ内没有任何东西这是为什么？还显示：
Error occurred when reading in the CD-R data
When reading the data on the CD-R, an error occurred.
Either a faultly CD-R has been inserted or the driver for the writer is faulty!
还有：
WARNING: THE DRIVER IS NOT SUITABLE!
For burning on the CD-Writer: "H: [1, 0, 0] CDWRITER - IDE5232", you have selected the driver:"Generic_Scsi3.dll (Generic SCSI-3/ATAPI-Driver (with display of recorder-buffer))".
However this Writer is NOT on this driver's list, so it is unknown, if this writer could be handled by this driver correctly.
So we can guarantee, writing processes succeed with this driver! If the writer is not compatible to some writer supported by this driver, most probably the writing process ends with an error, a defective blank or a system crash!
If the writing process is NOT successful, please select another driver for the writer (start the Feurio! CD Writer, select the writer, click at "Info", select the property sheet "Driver"; there click at "Select driver" and select another driver).
If you have found a new writer, that does work with this driver, please send us a message, so that we can add this writer to the list of supported writers of this driver. Please select at the menu "Extras" the entry "Generate report" and send this report with your message; then we'll have all informations we need!
Explanation:
Unfortunately different CD-Writers have several differences in the way in which they have to be contacted. This is why Feurio! has got some small"Drivers" (a type of "Program module", which contains the way to contact various CD-Writers.
Each driver contains the specific commands for a certain class of Writers.
In every driver, the device-IDs of the burners are stored which the driver is suitable for.
Normally when starting up Feurio! selects the driver which has the CD-Writer in its list. If, however, Feurio! does not know the Writer yet, Feurio! gives the user the opportunity to select a driver for the writer manually, i.e. you can say: "The Writer xyz should be contacted the same way as Writer abc" (e.g. if it is the successor model to the Writer abc).
[ 本帖最后由 taojf 于 2005-9-18 16:53 编辑 ] |
|
楼主: aomei
京公网安备 11010602010207号
( 京ICP证041102号，京ICP备09075138号-9 )
狗仔卡
楼主
发表于 2005-9-17 21:33
