UID75170
威望91
金钱111788
交易诚信度20
主题45
帖子1193
注册时间2004-6-16
最后登录2024-9-27
超级会员
     
交易诚信度20
注册时间2004-6-16
|

楼主 |
发表于 2006-2-3 14:52
|
显示全部楼层
audio research
LS2b资料
Description
Hybrid tube/FET stereo line stage. Exists in two versions: LS2 and LS2B (Balanced).
Introduced
1991 (LS2)
1992 (LS2B)
Discontinued
Revisions
LS2 MKII (1994)
LS2B MKII (1994)
Options
Remote control
Price
$2,495 (LS2)
$2,995 (LS2B)
$2,650 (LS2 MKII)
$2,995 (LS2B MKII)
Specifications
LS2B MKII:
Frequency response ± .5dB, 1Hz to 100Hz, -3dB points below 0.1Hz and above 300kHz
Distortion (THD) Less than .01% at 2V RMS output.(Typically less than .005% in midband)
Noise & hum 20µV RMS residual 1HF weighted noise at main unbalanced output with gain at minimum (100dB below 2V RMS output). Balanced input noise 100dB below 1V input.
Gain Main Output: 18dB
Balanced output: 24dB
Tape output: 0dB; (Optional 9dB gain reduction)
Input impedance 50K ohms unbalanced, 3 megohm balanced.
Output impedance 200 ohms main output. 400 ohms Balanced 1, Balanced 2 (10K ohms minimum load and 2000pF maximum capacitance)
Output polarity
Maximum inputs 20V maximum unbalanced, 8.5V (+21dB) maximum balanced
Rated outputs 2V RMS 1Hz to 100kHz into 60K ohm load (maximum output capability is 30V RMS [60V RMS balanced] output at 05% THD at 1kHz into a 10K ohm load)
Power supplies Electronically-regulated low and high voltage supplies. Two transformers (toroid for high voltage). Line regulation better than .01%
Tube complement (1) 6922
Power requirements 100-135VAC 60Hz (200-270VAC 50/60Hz) 60 watts maximum
Other
Dimensions 19" (48 cm) W x 5 1/4" (13.4cm) H (standard rack panel) x 10 1/4" (26cm) D. Handles extend 1 5/8" (4.1cm) forward of front panel. Rear chassis fittings extend 7/8" (2.3cm).
Weight 30 lbs.
Reviews
Issue 100 (LS2B)
Vol. 14 No. 10 (LS2), Vol. 16 No.1 (LS2B), Vol 16. No 4 (LS2B)
Picture
LS2:
LS2 MKII:
LS2B: |
评分
-
查看全部评分
|