UID824442
威望79
金钱141176
交易诚信度0
主题875
帖子65025
注册时间2011-6-4
最后登录2026-4-9
核心会员
      
交易诚信度0
注册时间2011-6-4
|
本帖最后由 chncwk 于 2013-5-24 09:18 编辑
里面有AVS网友的950参数,里面首次解释了“电影”选项的技术意义
Picture Settings (XBR-55HX950)
Enable 1:1 pixel mapping:
( 开启1:1像素映射)
Home > Settings > Picture & Display > Screen > Auto Display Area = “Off” and Display Area = “Full Pixel.”
Disable the ambient light sensor:
(关闭环境光检测)
Home > Settings > Preferences > Eco > Light Sensor = "Off."
Backlight is typically set near "Min" for a dim viewing environment and higher, as needed, for a bright viewing environment.
(背景照明接近最小,依据环境光大小而定)
Picture adjusts the contrast and is typically set at or near "Max."
(对比度接近最大)
A Color Temperature of "Warm 2" is near the 6500 Kelvin standard.
(色温:暖色2是最接近标准D65色温的)
Motionflow is typically set to "Off" to preserve natural 24p film cadence (with its native judder). The other options apply varying degrees of frame interpolation / backlight scanning / black frame insertion.
(Motionflow 通常设为关闭,能得到原生的24帧胶片速率。 其他选项会修改插帧、背光扫描、插黑帧的程度。
CineMotion enables an inverse telecine circuit on interlaced content. "Auto 2" reverses 3:2 pulldown to reconstruct the orginal 24 fps (film) cadence. "Auto 1" reverses 3:2 pulldown with mild smoothing (interpolated frames).
电影信号动态,在播放隔行交错信号时允许开启逆向的电视电影电路:“自动2”按逆转3:2下拉校正重建原始24帧胶片速率;“自动1”按逆转3:2下拉获得轻度平滑帧率(插帧运算)
Gamma is typically set between -1 and 0, depending on the brightness of the viewing environment.
(伽马通常设为-1和0,取决于观影环境的亮度)
LED Dynamic Control is typically set to "Standard" to fully enable backlight dimming.
(LED动态对比度通常设为“标准”,可最大程度地利用背光亮度加大对比度)
Remaining controls (brightness/color/hue/sharpness) are typically left at their midrange default setting.
(其他内容:亮度、颜色、色调、锐度采用默认值或中间值就行了)
|
|