JBL2440驱动头用什么号角好？复刻版大蜂巢？2309+2310？H93？还是复刻版TAD4001？

原上草 · 发表于 2011-4-9 11:15

马上注册家电论坛，众多有奖活动等你来参与！

您需要登录才可以下载或查看，没有账号？注册

x

复刻版大蜂巢、2309+2310售价8000
H93是奥林巴斯的原装小号角，售价5000
木制复刻版TAD4001售价2000
选取那个好？
H93那么小声音行吗？不用牛百叶声音影响大吗？

[ 本帖最后由原上草于 2011-4-9 12:33 编辑 ]

martin_wu · 发表于 2011-4-20 01:04

交易区新帖推荐

原帖由 原上草 于 2011-4-9 11:15 发表
复刻版大蜂巢、2309+2310售价8000
H93是奥林巴斯的原装小号角，售价5000
木制复刻版TAD4001售价2000
选取那个好？
H93那么小声音行吗？不用牛百叶声音影响大吗？

臭小子，给你做了些功课[s:8]
问了些外国朋友：
法国朋友：
The 2397 would be a good choice if used with a tweeter. Maybe your friend could also try searching for some TH4001 clones (there are some made in Hong Kong I think, beautiful but pricey). These would be easier to cross lower (650Hz) and could even be used without a tweeter, depending on the taste of your friend.

If he wants to keep the E140 maybe he should replace the metal dustcap with a paper one, to avoid audible breaking modes in the high mid that would be detrimental for hifi use
如果你使用超高的话，2397是个不错的选择，你也可以试着找一下TH4001(香港制造，漂亮但昂贵）。这个号角很容易下潜的更低些（650Hz),甚至没有超高也一样使用，完全取决于你自己的口味[s:14]
如果你坚持使用E140的话（言外之意是并不十分理想），你可以用纸质防尘帽更换金属防尘帽，以避免可耳闻的中高断点，这些断续对HIFI极为不利[s:18]

挪威朋友：
I bought a pair of TH4001 clones from the eBay vendor in Hong Kong. (There are a similar pair on eBay right now).

I can absolutely recommend them. They are correctly made, and very beautiful to boot. The adaptor for the driver is machined from solud aluminium, and fits very nicely.
I use mine with 2445 drivers (with 2450SL diaphragms), crossed at about 650 Hz and 8 kHz (to 2405's). They sound very nice.

IMO: Should be used with a tweeter. This sound better than trying to eq them flat to 20 kHz. I would imagine that this (in ever larger degree) also holds for the 2440 (although I have only tried mine with 2445's).
我从eBay的香港商家买了一对TH4001(eBay目前正好有一对类似的）。
我绝对推荐它，他们制作的不差分毫，而且十分漂亮。
号角适配器以铝车制，非常合适。
我用2445驱动器（采用2450SL的振膜）和它们配合，分频点取在650H和8kHz(到2405），声音好极了。
个人观点：最好和超高联合使用。这样比采用均衡方式以平直至20kHz会更好听。我想这对2440同样适用（虽然我只尝试了2445）。