UID624717
威望2
金钱6795
交易诚信度0
主题2
帖子113
注册时间2009-9-10
最后登录2025-12-18
初级会员
 
交易诚信度0
注册时间2009-9-10
|
2 band model:
FM ˜ AM
3 band model:
FM n MW n LW
To change the AM tuning interval
(Except for European models)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval to 10 kHz (or 9 kHz), press TUNER/BAND
repeatedly until "AM" appears first, then turn off
the power. While holding down +, turn the power
back on.
When you change the interval, the AM preset
stations will be erased. To reset the interval, repeat
the same procedure.
Note
The preset stations are retained for a week even if
you pull out the mains lead or if a power failure
occurs.
翻译后:
重复按 TUNER/BAND 按键直到你想要的波段显示在 收音CD播放器上。
2波段型号:
FM-AM
3波段型号:
FM n MW n LW
要改变AM调谐间隔(除欧洲型号以外)
AM调谐间隔出厂预设为9KHz(某些区域为10KHz)。 要改变AM调谐间隔到10KHz(或9KHz), 首先按 TUNER/BAND 按键直到显示"AM", 然后关闭电源。 然后再按压住 下down + 键,重新打开电源。
当改变了调谐间隔后,AM原先预设的台会被删除。要重置调谐间隔,请重复上面的步骤。
注意:
即使拔掉了电源线或者停电后,预设的电台还能够保存一周。 |
|