初尝试音响"神棍"!

莱克斯蔓 · 发表于 2010-3-17 21:28

如此轻飘飘，摇起来有点沙沙响的东西的确神奇[s:97] [s:97]

sunrong · 发表于 2010-3-17 22:12

旁门左道:loveliness:

gdsrj · 发表于 2010-3-18 22:59

原帖由 tosca 于 2010-3-17 21:19 发表
厂家资料：
Usage: Run the Audio Animator ultra short, swift movement and a small distance (1 to 2cm)

on the object to be processed, for example - recorded music, cable, speakers, hi-fi equipment. ...

这位兄台，下次查资料要查清楚一点，你这个资料是神棍另一种产品，请看下面的资料吧！
1: For mains cables,attach the animator 30 cm before the end of the cable (on the side devica).The device can simply be attached with the included cable connectors.The Animator can aiso be attached by shrinking it to the cable using heat-shrink thbing.The type of assembly has on the animator'sfunction and effect.When using multiple socket outlets (distributors),it is recommended to attach a cable animator its main input lead (also 30 cm before the distributor).

2: For speaker cables,attach the Cable Animator in the middle of the cable,(e.g., given a cable length of 4 meters,the animator is to be attached at half that length of exactly two meters,using the method described above). For bi-wiring-or bi-amping cabling, it is recommended to use an Animator on every cable harness.

3: For NF connection cables and 75 ohm digital cables as well as for antenna leads, the Animator is also attached in the middle of the cable length (see item 2,Speaker Cables).