UID571396
威望33
金钱156298
交易诚信度0
主题99
帖子2585
注册时间2009-2-28
最后登录2015-4-10
高级会员
交易诚信度0
注册时间2009-2-28
|
马上注册 家电论坛，众多有奖活动等你来参与！
您需要 登录 才可以下载或查看，没有账号？注册
x
这是LINN功放的使用手册，介绍了LINN的一些技术，看来令初烧吃惊，因为有些技术是个别烧友非常不认同的，呵呵，有意思。
1）功放使用了开关电源（老浦东喜欢的），LINN认为他们开发的开关电源优于传统电源；2）功放使用了大功率单片电路（有个DIY在主动伺服低音里用了大功率工业用单片的技术被个别烧友说是痴人做梦），LINN认为单片放大电路信号通路最短，干扰最小，最易控制，LINN和芯片公司合作开发了发烧级的大功率功放芯片；3）功放用了在LINN的音箱中广泛使用的某种主动伺服技术（也被个别烧友说是20年前淘汰的）的一部分技术，能对付低音；4）LINN的功放是模拟功放，已经有些不传统，但是LINN认为D类还不够成熟。我是外行，发烧是喜欢而已，希望懂行的大侠多介绍LINN的技术细节。
CHAKRA
WHITE PAPER
High-efficiency ultra-linear power amplifier technology
Linn strives for continuous improvement across every area of our business and product range. Technology used within any given
Linn product is selected on the basis of what is most appropriate for the application. We have proven that what you do with the
parts and technology is always much more important than how the technology is categorised. Two designs can use the same
components, but achieve completely different results.Throughout history, there have been many fine amplifier designs. Some use valves (tubes), some use bipolar transistors, some MOSFETs.
Some manufacturers swear by Class A, others by Class AB, one or two by Class D, and many others are somewhere in between. At Linn we
believe that different designs work best for different applications and illustrating this, our current power amplifier range contains MOSFET,
monolithic, discrete and bipolar designs. By continuously refining and improving all the core technologies involved, our latest monolithic
designs sound better than our previous discrete bipolar designs. Similarly our latest discrete bipolar designs have more power and sound
better than our earlier monolithic and bipolar designs.
BACKGROUND
Monolithic (single-chip) circuits are, in principle, the optimum way to design the direct signal path circuitry within a high-performance power
amplifier. With a monolithic design all of the required audio circuitry is contained within a few square millimetres of silicon, minimising
circuit area for the shortest possible signal path, making them inherently less susceptible to unwanted interference and enabling the
amplifier to operate at higher speeds. They also accommodate circuit complexity which is not practical with a less dense discrete design, and
offer high-performance through tightly controlled and matched device behaviours.
The investment required to design and manufacture these monolithic chips typically results in costs which are prohibitive to short-run
specialist applications such as high-end audio. Consequently they are normally targeted at high-volume applications where audio
performance is not the most important parameter. For a number of years, however, Linn has worked closely with trusted microchip
manufacturers and as a result, exceptional capability has been designed into a high-volume chip, that now enables Linn to realise the full
potential of this technolgy without requiring unfeasibly high production volumes.
This aside, monolithic topologies do present a number of other technical challenges, which, whilst not insurmountable, can compromise the
potential of a design. The most significant of these is output current, which is limited due to both the compactness of the circuitry and the
chip fabrication process, typically resulting in unwanted distortion at high listening levels. Monolithic designs also have a tendency to be less
rugged than a well-crafted discrete design.
MONOLITHIC CIRCUITRY
CHAKRA
Monolithic technology is used extensively throughout Linn’s product range, both as single chips and paralleled devices to increase power
output. The CHAKRA topology is the result of more than 5 years of continuous development of Linn’s high-power monolithic amplifier audio
circuits, and was initially conceived during development work for the Linn 328A professional monitoring loudspeaker. The Linn 328A
required greater power, circuit density and performance than even our reference monolithic power amplifier, the KLIMAX 500 Twin, could
offer, and so we began work on developing a solution which performed accurately and consistently in even the most demanding
monitoring applications.
The CHAKRA topology we devised uses an array of large bi-polar transistors as ‘boosters’ around a single monolithic. This approach in itself
is not a new idea, but Linn’s execution of the monolithic to bi-polar transition is truly unique, and a patent application for the design has
been submitted. When output current is less than a few amps, all of the power output comes from the monolithic, maximising the speed
and linear properties of this design. At higher output currents the bi-polars provide the majority of the output current, leaving the
monolithic to operate well within its capability and so able to correct any error instantaneously. Even under extreme overload conditions, like
short circuit, the monolithic never delivers more than a fraction of its safe output, while separate circuitry protects the bi-polars. So with
current output virtually unlimited, CHAKRA offers robust and powerful low-frequency response down to near DC. This is essential for the
type of servo-controlled bass systems used throughout Linn’s highest performance loudspeaker systems and benefits will extend across all
future iterations and applications of the CHAKRA topology. The new topology is also very compact, actually reducing the circuit area and
signal path length compared to our previous best paralleled topology and it is also highly efficient, running cooler than any previous Linn jamplifier design.
POWER SUPPLIES
While the new CHAKRA topology represents a massive step forward in Linn’s direct signal path circuitry, the overall performance of a power
amplifier is equally dependent on its power supply. Linn’s compact proprietary, audio-optimised Switch Mode Power Supply (SMPS)
technology generates stable, low noise power rails for the audio circuitry, with higher mains noise isolation and efficiency than the very bulky
and noisy conventional power supplies. The combination of SMPS and CHAKRA technologies creates a wealth of possibilities for new
configurations of high-performance, high-efficiency Silent Power amplifiers.
LINN ACTIVE TECHNOLOGY
A key design consideration during development of the CHAKRA audio circuit technology was the ability to power loudspeakers in
internally or externally active configurations. As a result, active modules can plug directly into the main CHAKRA amplifier for 7GW straightforward active system building. Each of these active modules filters the signal for one drive unit, with a separate module allowing
simple and subtle optimisation of the system to suit the room, aiding the simple installation of active systems and optimising performance.
CONCLUSION
The Linn CHAKRA technology eliminates the weaknesses and maximises the strengths of monolithic linear amplifier technology. It combines
the speed and precision of a high integration chip technology with the ruggedness and smoothness of discrete ultra-linear bipolar
transistors and delivers precisely controlled Linn Silent Power at all listening levels.
APPENDIX: CLASS D AMPLIFIERS
CHAKRA is a linear (continuous time) amplifier technology with a switch mode (discrete time) power supply. There are now several
products on the market based on switch mode amplifier technology commonly referred to as ‘Digital’ or ‘Class D’ amplifiers. This attempt
to associate the well known attributes of digital systems with these products is, however, at best a slightly misleading premise.
A traditional amplifier audio circuit features a continuously variable (linear) output stage generating the required output by dissipating as
heat the difference between the power supply voltage and the required output voltage. A Class D amplifier uses very high speed switches A to send the entire voltage of the power supply, with minimal power loss, as a sequence of pulses to the output, where a filter averages the
pulses before the loudspeaker terminals. The frequency, density and duty cycle of these pulses determine the average output voltage. This
is exactly how a switch mode power supply works, except that instead of generating the system power supply, the Class D amplifier circuit
is generating the final audio output.
Like SMPS, the concept of Class D amplifier audio circuit technology is not demanding; indeed Class D amplifiers have been around for years, but have failed to penetrate the specialist high fidelity sound equipment market, primarily because they lack the subtlety of well
executed linear amplifier technology. However, with the ever-more widespread adoption of multi-channel systems there is pressure on the
industry to develop lighter, smaller and cheaper power amplification platforms which in turn has sparked renewed interest and research effort
in Class D technology. The prospect of combining Linn’s Switch Mode Power Supply technology with advanced Class D audio circuitry is an
appealing one, but can only be considered when the technology is mature enough to offer a performance advantage - in other words, when
it meets the standards Linn customers expect from our company. Our best guess is that it could be as much as ten years until we can achieve
this level of reliability and performance. For all of these reasons we developed CHAKRA and envisage it will remain supreme in its segment
for many years to come.
[ 本帖最后由 今夜星光 于 2010-2-10 10:56 编辑 ] |
|
京公网安备 11010602010207号
( 京ICP证041102号，京ICP备09075138号-9 )
狗仔卡
发表于 2010-2-10 09:49
变色卡
楼主
