UID616864
威望2
金钱15864
交易诚信度0
主题20
帖子242
注册时间2009-8-9
最后登录2016-1-18
初级会员
 
交易诚信度0
注册时间2009-8-9
|

楼主 |
发表于 2009-8-24 11:04
|
显示全部楼层
[s:6] [s:6] [s:6] 广播级的飞机——————Philips LHH0426

The Philips LHH0426 Universal Inspection Players forms the main part of a test system that enables extensive measurements on Compact Disc Masters, Shells, Stampers, and Replicas. Measurements can be taken automatically, and measured data presented in a variety of formats.
Modular construction
The Universal Inspection Player comprises three basic modules:
a. The opto-mechanical unit, which consists of the rotation motor, optical pick-up assembly, and the sledge, together with all related electronics. The unit is mounted on the upper part of the Universal Inspection Player on a base plate which is isolated against vibration
b. The servo-unit. This contains the electronics for the rotation-servo, radial-servo, focus-servo, servo-control, and the interface (including an IEC-625 remote control bus).
c. The decoder unit, which includes the basic decoder electronics and several slots for the installation of a variety of options.
Comprehensive capabilities
The audio signal quality of the Philips LHH0426 is determined by the properties of the decoder circuitry as, for example, errors on the disc could be masked by one decoder strategy and not by another.
The Universal Inspection Player gives the user the ability to verify the quality of Disc Masters, Shells, Stampers, and Replicas, using several different decoder strategies. The layout of the circuitry is such that changover from one decoder to another (different strategiy) is easily accomplished by exchanging a board in the decoder electronics unit.
The following decoders are available:
- Decoder based on a 7-frame strategy
- Decoder based on a 8-frame strategy, with oversampling DA-conversion (several adaptions make this ideal for error detection and counting)
- Decoder based on a 8-frame strategy
Available options include:
- Decoder controller interface with IEC-625 bus
- Subcode processing and interface
- Programmable error counting
- General purpose interface
- Analogue audio output
- Digital audio output
Player system configuration
A typical system configuration is illustrated. Here, the test program which is stored by the user in the memory of the IEC-bus controller, evolves fully automatically. Output of the measured data is possible in a variety of forms - as plots on the mutli-pen intelligent plotter; tables or forms on the printer; or volatile data on the screen of the controller. It is also possible to monitor specific analogue signals on a dual trace oscilloscope for evaluation of signal properties.
 |
|