美国 JBL之 ES 系列系
特价大酬宾:
JBL ES90+ESC25+ES10是8500
JBL ES80+ESC25+ES10是8000
JBL ES 90
Maximum Recommended Amplifier Power 250 Watts
Power Handling (Continuous/Peak) 125 Watts/500 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 91dB
Frequency Response (–3dB) 32Hz – 40kHz
Crossover Frequencies 450Hz, 3000Hz - 24dB/octave;12000Hz - 18dB/octave
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded, EOS waveguide
Midrange Transducer 4" (100mm) PolyPlas™, shielded
Low-Frequency Transducers Dual 10" (250mm) PolyPlas™, shielded
Dimensions
(H x W x D) 45-1/2" x 12" x 16-5/8"
(1149mm x 305mm x 422mm)
Weight per Speaker 63,9 lb (29kg)
JBL ES 80
Maximum Recommended Amplifier Power 200 Watts
Power Handling (Continuous/Peak) 100 Watts/400 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 90dB
Frequency Response (–3dB) 45Hz – 40kHz
Crossover Frequencies 700Hz, 3600Hz - 24dB/octave;12000Hz - 18dB/octave
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded, EOS waveguide
Midrange Transducer 4" (100mm) PolyPlas™, shielded
Ultra-High Frequency Driver 3/4" (19mm) Polyester-film, ring-radiator, shielded, EOS waveguide
Low-Frequency Transducers Dual 6" (170mm) PolyPlas™, shielded
Dimensions
(H x W x D) 42-11" x 8-3/4" x 13-1/2"
(1084mm x 223mm x 330mm)
Weight per Speaker 46,3 lb (21kg)
JBL ES 30
Maximum Recommended Amplifier Power 125 Watts
Power Handling (Continuous/Peak) 70 Watts/280 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 88dB
Frequency Response (–3dB) 50Hz – 40kHz
Crossover Frequency 3000Hz - 24dB/octave;9000Hz - 18dB/octave
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded, EOS waveguide
Low-Frequency Transducer 6" (170mm) PolyPlas™, shielded
Dimensions
(H x W x D) 15-1/4" x 8-3/4" x 13"
387mm x 223mm x 330mm
Weight per Speaker 19.6 lb (8.9kg)
JBL ES 10
Maximum Recommended Amplifier Power 100 Watts
Power Handling (Continuous/Peak) 50 Watts/200 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 86dB
Frequency Response (–3dB) 65Hz –40kHz
Crossover Frequency 3000Hz - 24dB/octave;9000Hz - 18dB/octave
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded, EOS waveguide
Ultrahigh-Frequency Driver 3/4" (19mm) Polyester-film, ring-radiator, shielded, EOS waveguide
Low-Frequency Transducer 4" (100mm) PolyPlas™, shielded, EOS waveguide
Dimensions
(H x W x D) 7-7/8" x 12" x 5-1/2"
(201mm x 305mm x 140mm)
Weight per Speaker 8.8 lb (4kg)
JBL ES 25C
Maximum Recommended Amplifier Power 150 Watts
Power Handling (Continuous/Peak) 75 Watts/300 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 90dB
Frequency Response (–3dB) 80Hz – 40kHz
Crossover Frequency 3000Hz - 24dB/octave;12000Hz - 18dB/octave
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded, EOS waveguide
Ultra-High Frequency Driver 3/4" (19mm) Polyester-film, ring-radiator, shielded, EOS waveguide
Low-Frequency Transducers Dual 5" (130mm) PolyPlas™, shielded
Dimensions
(H x W x D) 7" x 18-3/4" x 10"
(178mm x 476mm x 254mm)
Weight per Speaker 16.7 lb (7.6kg)
JBL ES 250P
Amplifier Power (RMS) 400 Watts
Peak Dynamic Power 700 Watts
The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
Low-Frequency Transducer 300mm (12") PolyPlas™
Frequency Response 25Hz - 150Hz
Dimensions
(H x W x D) 19-3/4" x 15-3/4" x 16-7/8"
(502mm x 400mm x 428mm)
Weight 43 lb (19.5kg)
JBL ES 150P
Amplifier Power (RMS) 300 Watts
Peak Dynamic Power 500 Watts
The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
Low-Frequency Transducer 250mm (10") PolyPlas™
Frequency Response 27Hz - 150Hz
Dimensions
(H x W x D) 18" x 13-1/4" x 15-1/4"
(457mm x 337mm x 387mm)
Weight 39 lb (17.7kg)