BGW Professional Model 750G Specifications |
IHF Method 4% Duty Cycle Burst Power | Bridged Mono | Dual Channel |
8 ohms | 1350 W | 375 W/ch |
4 ohms | 2000 W | 675 W/ch |
2 ohms | | 1000 W/ch |
Intermodulation Distortion | less than 0.01% at rated 8 ohm power output (SMPTE method, 60 Hz & 7 kHz, 4:1 ratio) |
Rise Time | 4 猀 |
Slew Rate | 20 V/猀 (stereo mode), 40 V/猀 (mono mode) |
Damping Factor | > 500:1 (ref. 8 ohms) below 500 Hz |
Small Signal Frequency Response | 3 Hz - 85 kHz, +0/-3 dB
20 Hz - 20 kHz, +0,-0.2 dB |
Crosstalk | > 100 dB @ 20 Hz, > 85 dB @ 1 kHz,
> 60 dB @ 20 kHz |
DC Offset Voltage | <±10 mV (3 mV typical) |
Hum & Noise Level
8 ohms 20 Hz - 20 kHz | > 113 dB < 280 W (unwtd.) unbal.,
> 109 dB < 280 W (unwtd.) bal. |
Voltage Gain | X 31.6 = 30 dB |
Input Impedance
@ 8 ohm rated power | 15k ohms & 240 pF bal. or unbal. (bal. input between pin 2 & 3) 7.5k ohms & 480 pF (dual mono) |
Input Sensitivity | 1.50 Vrms for rated 8 ohm output |
Load Impedance | >= 2 ohms (stereo mode)
<= 4 ohms (mono mode) |
Power Requirement | 950 W for rated 8 ohms,
100, 120, 200, 220 or 240 V AC, 50-60 Hz |
Dimensions |
overall (h x w x d) | 7 X 19 X 15 (inches) |
behind front panel
(h x w x d) | 7 X 17.3 X 12.9 (inches) |
Weight | 55 lbs (24.9 kg.) net, 60 lbs (27.2 kg.) shipping |
Control | One position detented rotary control precision input attenuator per channel. Attenuation steps of 0, -2 through -30 dB (2 dB steps), -33, -36, -42, -50, -60 |
Switches | pwr/mag circuit breaker
fan defeat switch
bridged operation switch
dual mono mode switch
ground lift switch
subsonic filter switch |
Option | 06 balanced transformers |
Phase Shift | 20 Hz - 20 kHz &plsmn; 10° |
Polarity Convention | XLR pin 2 hot/tip, pin 3 -/ring, pin 1 ground/sleeve |
Warranty | 3 Years standar, parts/labor |
ProNet Price | $ 1,950.00 |
Applications | Recording/Post Production, Broadcast
|