UID104903
威望25
金钱51082
交易诚信度6
主题22
帖子380
注册时间2004-12-13
最后登录2017-8-14
高级会员
交易诚信度6
注册时间2004-12-13
|
楼主 |
发表于 2010-8-27 09:28
|
显示全部楼层
终于找到了设定时间的方法
Using the Timers:
n1.Press the CLOCK button on the Unit for more than two seconds. Press the 4 or ¢ button on the Unit to set the time.
Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Hold down the button to
move the time in 10-minute intervals1n3.Press the CLOCK button.
CAUTION: If there is a power failure, the clock loses its setting after about 20 minutes. The display shows “0:00” and blinks, and the clock must be reset.
Note: You can set the Timer whether the System is on or off.
Once you have set the Daily Timer, the timer will be activated at the same time every day. It can be cancelled and re-activated whenever
you wish.
The Timer indicator on the display shows when the Daily Timer you have set is in effect.
Note: Perform each setting within 30 seconds. Otherwise, the setting is cleared and the procedure must be repeated from the beginning.
Press the button to turn on the System. |
|